GOLDCHAMP Fake Security Camera, Solar Powered Bullet Dummy Surveillance Security Camera with Motion Sensor, IP66 Waterproof Wireless Simulated Surveillance Cameras, 3 Lighting Alarm Modes Solar Light

OVERVIEW:

▶Battery: 3.7V, single 18650 battery, 2600mAH
▶Built-in protection circuit: Built-in over-discharge protection circuit, the lowest discharge voltage is 2.4V
▶Solar charging voltage: 5.0V
▶PIR sensing distance: Up to 8M/26FT
▶PIR sensing angle of view: 160 ̊°
▶PIR induction duration: 20s
▶Lamp beads:8pcs 2835 package lamp beads:;Power is: 0.5W;Color temperature: 6500K, brightness: 60LM
▶Sensor light is on, constant current output: 330mA
▶Induction lamp dim current: ≤14mA
▶Standby current: ≤100uA
▶Built-in solar light keep an eye on: light keep an eye on detection voltage ≥ 0.6 volts, the light is off; the light is on at night.
▶Working temperature range: -30-70℃（-22℉-158℉）
▶Storage temperature range: -40-80℃（-40℉-176℉）
▶Charging time: 5-8 hours

Working Mode:
When solar light keep an eye on detection is ≥0.6V, the light is off. When solar light keep an eye on detection is less than 0.6V, the following two modes can be switched cyclically.

1) Mode 1: Long press the touch switch for 2 seconds to turn on, the light flashes twice. Lights up strongly when people pass by and goes out 20 seconds after leaving

2) Mode 2: Short press the tact switch. Lights up strongly when people pass by and turns into dim light 20 seconds after leaving,and the infrared sensor light will flash. In this mode, the red indicator light will at all times flash, whether it is day or night.

3) Mode 3: Short press the tact switch.Keep light on at night and auto light off all through daytime,no matter if anyone passes by

Warm prompt:

When the use of the camera for the first time, please charge it for 5-8 hours in the sun on a sunny day

Please test and confirm the lighting mode you want before installation, and adjust the direction of the solar panel and camera all through installation to make sure that the sun can directly shine on it

Make sure this fits by entering your model number.
?【3 Adjustable Working Modes】: Our Outdoor Simulated Surveillance Cameras have three working modes to meet your needs. You’ll change the working mode of the LED light through the button under the solar panel. Please test and confirm the required mode before installation. In case the camera is installed too high to easily change the lighting mode.
?【Sensitive PIR Motion Sensor Light】: Built-in PIR motion detection sensor and photoelectric sensor,induction light has a detection distance of up to 26 feet and a range of up to 160 degrees. It can turn on the full brightness light for 20 seconds when detecting motion. When someone appears within the sensing range, the lighting will wake up quickly within one second.
?【Portable and Easy to Install】：This fake solar security camera is easy to install. Choose a suitable place outdoors and adjust the direction of the solar panels to make sure that sunlight can directly shine on the solar panels. Then You’ll drill holes and fix the camera with the attached screws. No wiring, maintenance-free, and the installation location can be changed. It may be used as a warning or lighting.
?【High-quality Solar Panels】：Upgraded solar panel with a built-in 2600mAh high-power battery, faster charging, higher solar conversion, and long standby time. No wish to worry about rainy days and power outages. Light-sensitive charging all through the day and electric lighting at night.Eight high-brightness LED lights stylish and practical design.
?【Durable and IP66 Waterproof】: The outer shell is made of durable ABS with IP66 waterproof rating. The outdoor sun motion sensor light can adapt to more than a few weather conditions. It may be applied to the landscape of garden, courtyard, lawn, terrace, garage, porch, driveway, etc.